J.S. FielderElectrical
Whole-home standby generator on a concrete pad beside a San Tan Valley residence

Services

Standby Generator Installation in San Tan Valley, AZ

J.S. Fielder Electrical installs whole-home standby generators tied into the panel for homes across San Tan Valley, Queen Creek and the East Valley.

J.S. Fielder Electrical installs whole-home standby generators tied into the panel for homes across San Tan Valley, Queen Creek and the East Valley.

Jeff sizes the generator to your loads, sets the transfer, and ties it into the panel so the power comes back on without you standing in the dark.

ROC 357832 · CR-11 · Verify →ROC 357454 · KB-2 · Verify →Bonded · Insured

What's included

Done in one visit, most of the time.

  • Whole-home standby generator sizing
  • Automatic transfer switch setup
  • Panel tie-in and load management
  • Concrete pad and placement
  • Gas and electrical connections
  • Permit and inspection

The equipment

Brought to your job

Permitted workOwner on the install
Whole-home standby generator on a concrete pad beside a San Tan Valley residence

How it works

From the trench to the light head.

One contractor, one set of equipment, and one number that holds. Here's how a job moves from your call to a lit-up building.

01

Call or send the form

Ring (602) 619-8705 or send the estimate form. Jeff picks up himself and tells you straight what's next.

02

Jeff comes out — free estimate

The owner shows up, looks at the job, and gives you a straight number. No chain of subs, no surprises.

03

The work, with his own equipment

Bucket truck, lifts, excavator and Bobcat — already his. The trench gets dug, the conduit runs, the lights go up.

04💡

Final check & walkthrough

Jeff tests every circuit and walks you through it. It's done right or it isn't done.

Service questions

Questions about generator installation

Yes. Jeff installs whole-home standby generators that tie into the panel through an automatic transfer switch, so the house picks back up on its own when the power drops.

Jeff adds up the loads you want to keep running — and trims the ones you don't — then sizes the generator and the transfer so it carries the house without overloading.

Sometimes. If the panel or service needs work for the tie-in, Jeff handles that and the generator together — one job, one contractor.

Jeff pulls the permit and handles the electrical tie-in; the gas connection is coordinated with the qualified gas installer. He'll tell you the whole plan up front.

Need generator installation? Call Jeff.

The owner picks up the phone and tells you straight.

  • ROC 357832
  • 47 Years in the Trade
  • Owns His Own Bucket Truck
  • Free Estimates
  • Owner-Operated

Get a free estimate

Only your name and phone are required. Jeff calls you back the same business day.

Call · (602) 619-8705Free Estimate